نوار حرارتی ضد یخ زدگی
نوارهای حرارتی سیلیکونی برقی با کمترین مصرف برق با تولید گرمای بین 80 الی 90 درجه سانتیگراد از یخ زدگی لوله های آب ، فاضلاب ، مواد و… نوار حرارتی ضد یخ زدگی تانکرهای آب ، نوار حرارتی ضد یخ زدگی بتن ، نوار حرارتی ضد یخ زدگی ناودانی های آب باران ، نوار حرارتی ضد یخ زدگی پشت بام ، نوار حرارتی ضد یخ زدگی معبر های پر تردد ( ورودی های پارکینگ ها ، مجتمع ها ، بیمارستان ها ، مدارس ، ادارات و… ) جلوگیری می نماید .
نوار حرارتی ضد یخ زدگی 5 متری برق 220 ولت برق مصرفی : 200 وات
نوار حرارتی ضد یخ زدگی 10 متری برق 220 ولت برق مصرفی : 300 وات
12 ماه ضمانت المنت حرارتی الکترو نصیری
کلیه محصولات نوار حرارتی ضد یخ زدگی با برچسپ مخصوص بر روی کارتن و کارت گارانتی بارکد دار و هولوگرام عرضه می گردد.
*****
Anti-freeze solution for pipelines. Anti-freeze tape is a ready-made heating tape to keep pipelines protected against frost. The heating tape has a standard power capacity of 40 Watt/m and is capable of providing pipelines with anti-freeze protection up to –20ºC. By installing a built-in thermostat at the end of the anti-freeze tape, you can create a reliable and energy-saving frost protection system
Water lines and process pipe work can become a real problem when
temperatures drop below freezing. It’s only when the thaw comes that
you realise the damage a split or cracked water pipe can cause
This cable family of self-regulating, parallel circuit heating cables is used
for frost protection of metal and plastic pipes and vessels. With the
facility to cut on site to the required length, Self regulating heating cables provide a reliable heating solution to the problem of frozen pipe work
It can also be used for low temperature process maintenance up to 30
Degrees ‘C,. Maximum exposure temperature 80 ‘C
Will not withstand steam cleaning process
For safe area applications hazardous area applications on request
-Self regulating cable 60 – 200 ‘C
-constant wattage cable 180 ‘C
-PTFE insulation resistance wire 280 ‘C
-Silicone insulation resistance wire 180’C
-PVC insulation resistance wire 105 ‘C
-Mineral insulated heating cable 600 ‘C
The polymer core of an ETS heating cable
automatically adjusts power output at every
point along its length in response to temperature
This response characteristic
eliminates burnouts caused by overlapping
cable and provides improved energy efficiency
without the need for special controls
The crosslinked, conductive polymer core
of the ETS heating cable is extruded
between two 14 AWG copper bus wires
forming a parallel circuit. This allows
ETS heating cables to be cut to
length—and to be spliced and repaired, if
necessary—in the field
Specifically designed for direct burial, ETS
heating cables are protected by a copper
braid and encased in a 55-mil modified
polyolefin outer jacket. With no exposed
metal parts to corrode, no cold leads to fail,
and no burnout due to overlaps or hot
spots, rugged ETS heating cable offers the
best solution for all types of electric thermal
storage applications